Information About Axle Counter,Track Structure Point & Crossing,Cable Schematics,CBTC Equipment,Overlaps,Core Plans,Earthing,ERTMS,Headway Calculation,Hot Axle Box Detectors,Interface Design,Level Crossing,Markers & boards,Bonding Plan Electrical Lockings,Route locking,Automatic Warning Systems AWS,Point Circuit,Equipment Treadle,Track Layout,Track Circuit Interrupters,Train Protection Warning System (TPWS),Slip Siding & Catch Siding.
Railway SCS to Relay Rack Interface – JNUP Thales SCS Electronics Rack/Relay Rack Interface * SELTRAC Overview * SCS Electronics Rack Overview * SCS/Relay Rack Interface * ACE/Relay Rack Interface * Reference Documents SELTRAC OVERVIEW SCS ELECTRONICS RACK OVERVIEW * Each SCS contains two computers known as ‘INTERSIG A’ and ‘INTERSIG B’. * […]
Continue Reading
Relay Rack Design JNUP Thales Railway JNUP Relay Rack Design * Relay Rack Overview * Design Principles * Design Features * Circuit Principles * RS Overview * Points Overview * RGI * SPK * Reference Documents RELAY RACK OVERVIEW Typical SER Relay Rack Connections * In the SELTRAC system, the relay rack is the interface […]
Continue Reading
Track Circuit Interrupter Railway * Track circuit interrupters are Emergency stop devices. These are provided at designated locations to provide a vital indication that a train has run into a portion of track in which movements are not permitted (e.g. into trap points or Catch points or past FRLs at terminal platforms). * It […]
Continue Reading
Types of Point Machines Railway * Nomenclature Left-hand turnout Right-hand turnout * Common components Stretcher Bars * Legal requirement on turnouts * Insulator required for correct track circuit operation Point locking * LUL provides facing point locks on all points where there are signalledmoves in a facing direction on or potential […]
Continue Reading
Railway Signals Use in Thales Railway Signals Use in Thales : The signalling must provide the train operator with clear and unambiguous information about the state of the line ahead under normal operating conditions with sufficient time to react to changes of aspect.For automatically signalled areas, the red and green aspects of the stop signal […]
Continue Reading
Railway Signalling Track Circuit Interrupters Presentation Definition * Catch points and trap points are types of turnout which act as railway safety devices. * Catch Points Points are provided to derail vehicles running back on rising gradients. The points may only be Unworked if traffic is in one direction only. Catch points are used to derail vehicles that are out of control on steep […]
Continue Reading