Information About Axle Counter,Track Structure Point & Crossing,Cable Schematics,CBTC Equipment,Overlaps,Core Plans,Earthing,ERTMS,Headway Calculation,Hot Axle Box Detectors,Interface Design,Level Crossing,Markers & boards,Bonding Plan Electrical Lockings,Route locking,Automatic Warning Systems AWS,Point Circuit,Equipment Treadle,Track Layout,Track Circuit Interrupters,Train Protection Warning System (TPWS),Slip Siding & Catch Siding.
Metro Rail Signalling and train control system Installation Signals – (1) The signals to be provided for controlling the movements of trains on the metro railway shall be, – (a) Cab signals. (b) Fixed line-side signals (where provided). and (c) Hand signals for shunting purposes. (2) The signalling and train control system shall be Continuous […]
Continue Reading
Metro Rail Absence of cab signaling Failure of fixed Signals Failure of route setting Absence of cab signaling (1) Failure of the cab signaling shall initiate an irrevocable emergency brake application. (2) The Train Operator shall report the occurrence to the Traffic Controller and seek instructions. (3) The Traffic Controller shall verify as far as […]
Continue Reading
Metro Rail ATS System Introduction ATS is at the Heart and Brain of various Systems operational in DMRC. 1. Acts as an Intelligent Interface where one can see all trains running in real-time in the entire network from a remote central location. 2. ATS is a Central and Key unit making the job of Operation […]
Continue Reading
Work on service building structures vicinity equipment Work on service buildings and structures in the vicinity of live equipment –The Metro Railway employee required to carry out work on service buildings and structures in the proximity of Overhead Equipment shall exercise special care to ensure that tools, measuring tapes, and materials are not placed in […]
Continue ReadingMetro Rail Locomotives work trains maintenance vehicle Locomotives, work trains, and maintenance vehicles –(1) Locomotives work trains, and self–propelled maintenance vehicles equipped with Automatic Train Protection equipment shall be worked as per rules of operation for passenger trains. (2) The operator of a self-propelled maintenance vehicle that is permitted to operate on running lines shall […]
Continue Reading
Metro Rail Design of Electric Installations Metro Rail Design of Electric Installations – (1) The design of all electric installations, namely transmission and distribution lines, sub-stations, switching station, rigid overhead current collection system, regulated overhead equipment, third rail DC Traction System etc. as applicable, shall be according to approved standards laid down by the Central […]
Continue Reading