Determination of clearance point

Railway Use of Axle Counters,Fouling Point,Clearance point

Design Requirements,Design Consideration for choice of train detection, Use of Axle Counters,Fouling Point,Clearance point,Determination of clearance point Railway Use of Axle Counters,Fouling Point,Clearance point The Design requirements for train detection systems includes the following: Interface with authorised rail vehicles(positioning of IRJs, minimum track circuit lengths, which may be dependent on permissible speed, and interlocking measures to […]

Continue Reading
Insulated Rail Joints

Railway Insulated Rail Joints

Insulated Rail Joints,Insulated Rail Joints Buffer Stops Railway Insulated Rail Joints Insulated Rail Joints (IRJs) are required to join together mechanically but no electrically. they are required for the follwing purposes: to define the limits of jointed track circuits, to provide insulation between rails at S&C, necessitating track circuit transpositions, where transpositions are required for […]

Continue Reading
Minimum Length

Railway Bonding Details in D.C. Electrified Areas

Bonding Details in D.C. Electrified Areas,Minimum Length,Minimum length of track section,Dimensions Value Railway Bonding Details in D.C. Electrified Areas Railway Bonding Details in D.C. Electrified Areas :- Separate Track Plans and Negative Bonding Plans are only used on the former Southern Region. The impedance bond rail connections and the bond to bond connections must be shown […]

Continue Reading